Home »
Chainsaw Mills »
NEW! Logosol F2 Sawmill (for petrol chainsaws)

NEW! Logosol F2 Sawmill (for petrol chainsaws)

Sawmill with quality in every detail - made in Sweden

The F2 is an ultra-portable sawmill, which easily cuts up large logs. In addition, it is so lightweight that you can lift and move the sawmill by hand. This sawmill is affordable and incredibly easy to use. Even if you never have sawn timber before, you will quickly get started with your production of planks and boards for your building projects. You take every cut with impressive precision. The F2 is made of strong anodized aluminium, a material with amazing properties. You get a maintenance-free, lightweight sawmill that will never rust and that stands up to logs that weigh up to one metric ton.

Advantages of the F2

A lightweight sawmill with minimum setup time. With just a few simple steps, the sawmill is dismantled for transport or storage.
The frame is built of 1-metre sections that fit in the boot of a standard car if required.
Strong log lifters with log beds, which together can stand up to one metric ton!
A lightweight saw carriage that slides perfectly on the guide rail, prepared for optional crank handle and bar nose steering. Chainsaw, electric saw and electric feed unit are compatible.
Fully anodised aluminium sections are a durable and dirt repellent surface. It never rusts.
The sawmill can be extended and upgraded when required.
Adjustment of depth of cut in fixed steps, gives your timber exact dimensions.
Adjustable sawmill feet included for steady positioning.
Strong locking of the guide rail sections facilitate assembly and gives increased stability.
Convenient easy-grip carrying handle for easy moving.
2 XL log clamps are included.

Technical data

Length: 4 m as standard
Width: 0.7 m
Weight: 52 kg without saw unit
Log diameter: Up to 60 cm, with the possibility of sawing even larger logs
Log length: 3.8 m as standard, but can be extended to any length
Accessories: All accessories for the LOGOSOL chain sawmiills are compatible.
The sawmill can be extended when required.
Almost any chainsaw with two guide bar bolts and ample power for sawmilling. Stihl and Husqvarna recommended.
Recommended Stihl chainsaw MS391/MS661 or Logosol electric saws. Petrol and electric Log Moulder also available.

Carriage upgrade package

The basic saw carriage supplied with the F2 can be upgraded with this upgrade package for more convenient feed of the saw unit and higher accuracy when taking wide cuts.

Winding crank - Provide a more convenient way to feed the saw through the log, is easier of the operator and provides higher productivity.

Bar nose steering - a cross bar supporting a magnet, holds the chainsaw bar more steady, reduces vibration, and potential bar sag. This increases dimensional accuracy and provides an even nicer sawn finish.

An upcoming release will also include Water cooling which is useful in some instances, (like when milling wide hard logs) the water cooling the bar/chain improves productivity and reduces wear. Ideal for wide Australian timbers. This can be retrofitted to the carriage upgrade package at a later date.

The above three features are part of the upgrade package, this package requires the F2 basic saw carriage that is provided with each F2 mill.

Extensions

In its basic configuration, this sawmill can be assembled as a 3 metre long sawmill with 1 metre between the log beds or as 4 metre long with 2 metres between the log beds. Extensions make it easy for you to extend the sawing length in steps of 0.5, 1, 2 or 3 metres.

Build your F2 sawmill system.

Proceed through the following steps to build your custom system, adding the preferred items from each step to your shopping cart.

On any item, clicking 'More Info' will provide you with details specific to that item, including scope of delivery, specifications, and more.

Step 1. Select your F2 sawmill. Step 2. Optional carriage upgrade. Or... Step 3. Select the package.

F2 Sawmill Package: incl. upgraded carriage, 63cm ripping bar, two 63cm ripping chains, and XL log clamps

Fits Stihl chainsaws. Chainsaw not included.
Includes 4m of rail (cuts 3.8m long longs up to 60cm diameter), height adjustable log beds 2m apart (can be moved 1m apart with 3m of rail), XL log clamps, and basic chainsaw carriage. Add rail extension to cut even longer logs.

Regular Price: $3,397.00

Special Price $3,197.00

Ask about availability - click here. Usually ships in 1-10 days.
- + Compare
- + Wishlist
F2 Sawmill: incl. basic chainsaw carriage and XL log clamps

Chainsaw not included.
Includes 4m of rail (cuts 3.8m long longs up to 60cm diameter), height adjustable log beds 2m apart (can be moved 1m apart with 3m of rail), XL log clamps, and basic chainsaw carriage. Add rail extension to cut even longer logs.

$2,690.00
Ask about availability - click here. Usually ships in 1-10 days.
- + Compare
- + Wishlist
F2 carriage upgrade (incl. winding carriage, magnetic chain bar tip holder, location for water cooling) for 63cm bars

Chainsaw not included
The basic saw carriage supplied with the F2 can be upgraded with this upgrade package for more convenient feed of the saw unit and higher accuracy when taking wide cuts.
Suitable for 63cm (or or close) chain bars.

$389.00
Ask about availability - click here. Usually ships in 1-10 days.
- + Compare
- + Wishlist

Step 4. Add a chainsaw if required.

Logosol mills are designed to work with many chainsaws as long as they have two chain bar bolts. These two bolts are used to mount the chainsaw to the carriage.

So you can use suitable Stihl, Husqvarna and other chainsaws with our mills.

If you need a chainsaw we recommend the following models.

Stihl MS391 chainsaw (excludes bar and chain)

Only available with a Logosol sawmill.
At 64cc it is a great saw for lots of chainsaw milling projects.
With 3/8th drive sprocket that fits standard 3/8th and 3/8th Low Profile 'picco' ripping chains.

Regular Price: $1,295.00

Special Price $1,245.00

To order, please call 1300 769 258 or email support@logosol.com.au
Out of stock
- + Compare
- + Wishlist
Stihl MS661 C-M chainsaw (excludes bar and chain)

Only available with a Logosol sawmill.
Powerful at 91cc and incorporates most of the latest Stihl technologies.
With 3/8th Low Profile 'picco' drive sprocket, and alternative sprocket cover with non-captured bar nuts (normal MS661 saws have a cover with captured bar nuts making it more complex to fit to Logosol chainsaw mills).

Regular Price: $1,995.00

Special Price $1,895.00

To order, please call 1300 769 258 or email support@logosol.com.au
Out of stock
- + Compare
- + Wishlist

Step 5. Select additional ripping chains and bars.

We recommend having a number of spare chains available for increased productivity.

These bars and chains are thin kerf "picco" type for improved cut quality and reduced power requirements.

63cm ripping bar and chains for STIHL chainsaws.

63cm bar/chain can achieve larger diameter cuts, but may cause some vibration when used with smaller diameter logs. Make sure your chainsaw is powerful enough for large diameter logs. Stihl MS661 suggested.

Stihl Ripping Chain 84 dl 1,3 PMX 63cm

Chain for 24'' (63 cm) Guide Bar (.050'', 3/8'', 84 DL)

$84.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Premium Ripping Guide Bar 63 cm 3/8th Pi for Stihl chainsaws

63cm bar for Stihl chainsaws.3/8th Picco 1.3m drive link.For use with our PMX ripping chains and other picco 3/8th chains.
Our Premium bars are thicker and stronger made from a solid single piece of steel.

$150.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Stihl Ripping Chain 84 dl 1,3 PMX 63cm - Qty 3

Qty 3. Chain for 24'' (63 cm) Guide Bar (.050'', 3/8'', 84 DL)

Regular Price: $252.00

Special Price $199.00

Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist

50cm ripping bar and chains for STIHL chainsaws.

50cm is the recommended length chain/bar to achieve good balance between size of cuts, low vibration, and easier for the chainsaw.

Stihl Ripping Chain 72 dl 1,3 PMX 50cm

Chain for 20'' (50 cm) Guide Bar (.050'', 3/8'', 72 DL)

$72.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Premium Ripping Guide Bar 50 cm 3/8th Pi for Stihl chainsaws

50cm bar for Stihl chainsaws.3/8th Picco 1.3m drive link.For use with our PMX ripping chains and other picco 3/8th chains.
Our Premium bars are thicker and stronger made from a solid single piece of steel.

$125.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Stihl Ripping Chain 72 dl 1,3 PMX 50cm - Qty 3

Qty 3. Chain for 20'' (50 cm) Guide Bar (.050'', 3/8'', 72 DL)

Regular Price: $216.00

Special Price $188.00

Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist

40cm ripping bar and chains for STIHL chainsaws.

40cm chain/bar is handy an inexpensive to start chainsaw milling and gives an excellent finish. Especially if your chainsaw is limited in power.

Stihl Ripping Chain 60 dl 1,3 PMX 40cm

Chain for 16'' (40 cm) Guide Bar (.050'', 3/8'', 60 DL)

Regular Price: $60.00

Special Price $48.00

Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Premium Ripping Guide Bar 40 cm 3/8th Pi for Stihl chainsaws

40cm bar for Stihl chainsaws.3/8th Picco 1.3m drive link.For use with our PMX ripping chains and other picco 3/8th chains.
Our Premium bars are thicker and stronger made from a solid single piece of steel.

$110.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist

63cm ripping bar and chains for HUSQVARNA and other D009 mount chainsaws.

63cm bar/chain can achieve larger diameter cuts, but may cause some vibration when used with smaller diameter logs. Make sure your chainsaw is powerful enough for large diameter logs.

Stihl Ripping Chain 84 dl 1,3 PMX 63cm

Chain for 24'' (63 cm) Guide Bar (.050'', 3/8'', 84 DL)

$84.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Premium Ripping Guide Bar 63 cm 3/8th Pi D009 for Husqvarna/other chainsaws

63cm bar for Husqvarna/other chainsaws.3/8th Picco 1.3m drive link.For use with our PMX ripping chains and other picco 3/8th chains.
Our Premium bars are thicker and stronger made from a solid single piece of steel.

$150.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Stihl Ripping Chain 84 dl 1,3 PMX 63cm - Qty 3

Qty 3. Chain for 24'' (63 cm) Guide Bar (.050'', 3/8'', 84 DL)

Regular Price: $252.00

Special Price $199.00

Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist

50cm ripping bar and chains for HUSQVARNA and other D009 mount chainsaws.

50cm is the recommended length chain/bar to achieve good balance between size of cuts, low vibration, and easier for the chainsaw.

Stihl Ripping Chain 72 dl 1,3 PMX 50cm

Chain for 20'' (50 cm) Guide Bar (.050'', 3/8'', 72 DL)

$72.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Premium Ripping Guide Bar 50 cm 3/8th Pi D009 for Husqvarna/other chainsaws

50cm bar for Husqvarna/other chainsaws.3/8th Picco 1.3m drive link.For use with our PMX ripping chains and other picco 3/8th chains.
Our Premium bars are thicker and stronger made from a solid single piece of steel.

$125.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Stihl Ripping Chain 72 dl 1,3 PMX 50cm - Qty 3

Qty 3. Chain for 20'' (50 cm) Guide Bar (.050'', 3/8'', 72 DL)

Regular Price: $216.00

Special Price $188.00

Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist

Sharpening kit for ripping chains.

It is important to use a file that specifically matches the above ripping chains. The Pferd file holder simultaneously grinds the tooth and tooth depth gauge (rakers) in one action as it combines both a round and flat files in the handle. You also need to sharpen at 10 degrees, our Filing Device firmly holds the chain for sharpening and guides you to sharpen at the correct 10 degree angle.

Filing Vice 39 cm

Firmly holds the chain for sharpening and guides you to sharpen at the correct 10 degree angle for ripping chains. Also includes indicators at 30 degrees for cross cutting chains.

$193.00
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
Pferd File Holder : 4,8 mm

Simultaneously grinds the tooth and tooth depth gauge (rakers) in one action as it combines both a round and flat files in the handle.

$79.50
Ask about availability - click here. Usually ships next day.
- + Compare
- + Wishlist
TECOMEC Professional Electric Chain Sharpener - JolyEVO

A professional quality chain sharpener by Tecomec (Italy). Reliable, self centering chain guide, accurate chain grinding. 240V mains input. 3 year warranty.

Regular Price: $490.00

Special Price $450.00

Ask about availability - click here. Usually ships same/next day.
- + Compare
- + Wishlist

Additional sharpening equipment can be found on this page, including manual, electric, and automatic sharpening robots.

Step 6. Select extensions.

The folding sawmill is built in sections of 1 metre and the basic model can be assembled as a 3 metre long sawmill with 1 metre between the log beds, which is suitable for short workpieces, or as a 4 metre long sawmill with 2 metres between the log beds for longer timber. When required, it is easy to extend to any length you want, using guide rails and log beds. If you want to cut long timber, it could be a good alternative to build a 6 metre long sawmill with three log beds.

The sawmill can be extended in steps of 0.5 or 1 m – to any length. If you extend with one metre or more you should also fit a support leg to the end of the guide rail. The automatic sawing support gives the workpiece extra support when the last cuts are taken and improves the precision of the sawmill, especially when the guide rail has been extended.